Caliber X-CHANGE Kit, P226, 9mm
Installation of a Caliber X-Change kit is simple and only takes a few seconds (you basically field strip the pistol and install the conversion slide). To install, remove the magazine and make sure the pistol is unloaded and clear. Lock the slide back and rotate the takedown lever down approx 90 degrees. Pull back on the slide and press the slide stop and ease the slide forward off of the frame. Take the new slide, fully assembled with barrel, guide rod, and recoil spring, and mount it on the frame. Lock the slide back with the slide stop and rotate the takedown lever back to its original position. The conversion swap is complete.